CP SERIES OF CO2 LASERS

The CP Series laser is a family of Fast Axial Flow CO2 lasers producing a high quality beam for material processing. The design utilizes the latest technology with a basic philosophy that stresses simplicity and high reliability for worldwide usage. The CP Series, a rugged industrial laser, is inexpensive to operate, extremely reliable and very easy to use.

Main Features: 

  • High brightness beam for greatest power density
  • Unique resonator structure - fast warm-up, excellent temporal and spatial stability
  • Solid-state power supply - reliable, low maintenance operation
  • Powerful controls interface
  • Low operating costs
  • Small footprint (<90 cubic feet)

CP laser cutting samplesResonator Features:

  • Machined aluminum end plates for increased optical stability
  • Resonator design comprised of forced balanced components, symmetry and near
    zero growth advanced composite elements
  • Kinematic mounting - excellent beam quality and pointing stability
  • End blocks at ground potential
  • Designed for rapid service

Power Supply Features:

  • Independent control over pulse peak, pulse plateau and overall pulse width
  • High voltage components protected from environmental contamination
  • Advanced IGBT technology power supply

Controls and Interface Features:

  • PrimaLogic programmable logic controller
  • Versatile interface - laser can be operated from CNC or local control

CP SERIES LASER SPECIFICATIONS

 

CP3500

CP4000
Average Power

200 to 3500 W

200 to 4000 W
Power Stability

+/-2% Full Scale
Wavelength

10.6 µm
Beam Propagation factor M2 max
                                                   typical

<2.4
2.0 to 2.2
 Beam Propagation K-factor    max
                                                   typical

 >0.42
0.45 - 0.5
Beam Divergence

1.5 mrad half angle
Beam Diameter at Output

14.5 mm 1/e2, 19 mm full beam
Pulsing          Pulse Repetition Rate
        Pulse Width

0 - 2 kHz
>100 µseconds
Pointing Stability

+/- 150 µrad

Operating Conditions

 

                     Ambient Temperature

10°C / 40°C (50°F / 104°F)

               Relative Humidity

<95% Non-Condensing
Diode Laser

 
        Wavelength

635 nm

           Power Output

 <1 mW

 CP SERIES LASER UTILITIES SPECIFICATIONS


 

CP3500

CP4000

Electrical

 

 

Maximum Power Required

31 kW

34 kW

 Voltage

400 VAC - 460 VAC, 3-Phase

Cooling

 

 

Required Cooling Capacity

36 kW

40 kW

Flow Rate

133 liters/min. (35 gallons/min.)

Inlet Temperature

18 - 20 °C  (64-68°F)

Inlet Pressure    nominal / max

3 Bar / 6 Bar max  (40 psi / 80 psi max)

Pressure Differential

1.5 Bar (20 psi)

Fluid

Distilled Water with 35% Dowfrost™ HD

Filter Requirements

100 µm

 Gas

 

 

 

 Pressure
Type

 Gas Mix

Purity

Consumption (variable with power)

 

He

 68%

99.996%

13.4 to 46.8 slph

4 bar (60 psi) 

CO2

 4%

99.995%

0.9 to 3.0 slph

4 bar (60 psi) 

N2

 28%

99.996%

5.8 to 20.2 slph

4 bar (60 psi) 

Total

 100%

<10 ppm H20, O2
+ hydrocarbons

20 slph - 70 slph

 

 Air

 Clean and dry

  

 

 5 bar (70 psi)
 

CP LASERS are now available for retro-fit to your existing laser system. Take this oppurtunity to extend the life of your installation and gain processing capability.  

For additional information, please select Sales

Prima Electro North America, LLC
711 East Main Street
Chicopee, MA  01020
413-598-5200