CONVERGENT LASERS CV5000
CV 5000The CV Series laser is the newest Fast Axial Flow CO2 laser from Convergent.  This laser produces the high power and an exceptional quality beam required for the most difficult cutting and welding applications. The design utilizes the latest technology with a basic philosophy that stresses simplicity and high reliability for worldwide usage.  CV Series lasers, like the CP Series lasers, are rugged industrial lasers, inexpensive to operate, extremely reliable and very easy to use.

Main Features:

  • High brightness beam for greatest power density
  • DC excitation - resulting in superior electrical efficiency when compared to RF excited lasers
  • Magnetic Bearing Turbine - no more bearing changes
  • Unique resonator structure - fast warm-up, excellent temporal and spatial stability
  • Solid-state power supply - reliable, low maintenance operation
  • New user friendly Controller - featuring advanced remote diagnostics
  • Low operating costs - Proportational gas usage as a function of power
  • Single cabinet design for easy access to maintenance points

CP laser cutting samplesResonator Features:

  • Machined aluminum end plates for increased optical stability
  • Resonator design comprised of forced balanced components, symmetry and near
    zero growth advanced composite elements
  • Kinematic mounting - excellent beam quality and pointing stability
  • End blocks at ground potential
  • Designed for very long intervals between required service

Power Supply Features:

  • CV 5000High voltage components protected from environmental contamination 
  • Advanced IGBT technology power supply
  • Newly designed "oil-less" solid state power supply 
  • Fast rise time resulting in optimum cutting of the most complex contours without worry of overheating  

Controls and Interface Features:

  • Versatile interface - laser can be operated from CNC or local control
  • CAN Bus communication between controller and components / sensors

 CV SERIES LASER SPECIFICATIONS

 

CV5000
Average Power

200 to 5000 W
Power Stability

+/-2% Full Scale
Wavelength

10.6 µm
Beam Propagation factor M2 max
                                                   typical

<2.4
2.1 - 2.3
Beam Propagation K-factor    max
                                                   typical

 >0.42
0.43 - 0.48
Beam Divergence

1.5 mrad half angle
Beam Diameter at Output

14.5 mm 1/e2, 19 mm full beam
Pulsing - Pulse Repetition Rate
Pulse Width

0 - 2 kHz
>100 µseconds
Pointing Stability

+/- 150 µrad

Operating Conditions

 

                       Ambient Temperature

10°C / 40°C (50°F / 104°F)

                 Relative Humidity

<95% Non-Condensing
Diode Laser

 
          Wavelength

635 nm
            Power Output

 <1 mW

CV SERIES LASER UTILITIES SPECIFICATIONS

 

CV5000

Electrical Power

40 kW

 Voltage

400 - 460 VAC, 3 Phase

   Cooling

 

Required Capacity

45 kW

Flow Rate

133 liters/min (35 gallon/min)

Inlet Temperature

18° - 20°C  (64° - 68°F)

Inlet Pressure nominal / max

3 Bar / 6 Bar max (40 psi / 80 psi max)

Pressure Differential

1.5 Bar

Fluid

Distilled Water with 35% Dowfrost HD

Filter Requirements

100 micrometer

 Gas

 

 

 

 
Type

 Gas Mix

Purity

Consumption (variable with power)

   Pressure 

He

 68%

99.996%

13.4 to 46.8 slph

4 bar (60 psi)

CO2

 4%

99.995%

0.9 to 3.0 slph

4 bar (60 psi)

N2

28% 

99.996%

5.8 to 20.2 slph

4 bar (60 psi)
Total

 100%

 <10 ppm H20, O2
+ hydrocarbons
 20 slph - 70 slph

 
 Air

 

 Clean and dry   

5 bar (70 psi) 

For additional information, please select Sales


Prima Electro North America, LLC
711 East Main Street
Chicopee, MA  01020
413-598-5200