The CP SERIES laser is a family of fast AXIAL flow CO2 lasers producing a high quality beam for material processing. The design utilize the latest technology and with a basic philosophy that stresses simplicity and high reliability for worldwide usage. The CP SERIES, a rugged industrial laser, is inexpensive to operate, extremely reliable, and very easy to use

Main Features:
Ø Enhanced pulsing - to 7,000 watts
Ø High brightness beam for greatest power density
Ø Unique resonator structure - fast warm-up, excellent temporal and spatial stability
Ø Solid-state power supply - reliable, low maintenance operation
Ø Powerful controls interface
Ø Low operating costs
Ø Small footprint (<90 cubic feet)

Resonator Features:
Ø Machined aluminum end plates for increased optical stability
Ø Resonator design comprised of forced balanced components, symmetry and near zero growth advanced composite elements
Ø Kinematic mounting - excellent beam quality and pointing stability
Ø End blocks at ground potential
Ø Designed for rapid service

Power Supply Features:
Ø Independent control over pulse peak, pulse plateau and overall pulse width
Ø Peak pulse power up to two times the rated average power
Ø High voltage components protected from environmental contamination
Ø Advanced IGBT technology power supply








Controls and Interface Features:
Ø GE Fanuc Versamax programmable logic controller
Ø Versatile interface - laser can be operated from CNC or local control
 
 
CP SERIES TECHNICAL SPECIFICATIONS
Adjustable power range (CW) 200-3500 Watts (200-3600 typical)
Peak pulse power 7 kW
Power stability ±2%
Pulse length range 250 µsec - CW, 70 µsec resolution
Repetition rate 0-2000 Hz
Wavelength 10.6 µm
M2 <2.5 (typical 2.2 0-3 kW; 2.4 3 kW and above)
Beam diameter at output (1/e2) 14 mm
Waist position 0-3.0 m from output
Divergence 1.5 mrad half angle
Pointing stability < ±150 µrad(< ±60 µrad typical)
Electrical consumption 34 kW at maximum power
Electrical service 400/460 VAC ± 10%; 3 phase + gnd; 50/60 Hz
Gas proportions CO2 4.3%; N2 28.8%; He 66.9%
Gas pressure 400 kPa (60 psi)
Gas consumption 20-70 liter/hr. (1.2 scfh) variable
Ambient operating range 10-40°C (50-104°F)
Relative humidity 95% non-condensing
Heat load 36.5 kW
Coolant temperature 18-20°C ± 1°C (65-68°F ± 2°F)
Coolant pressure 150 kPa (40 psi), differential; 400 kPa (60 psi), absolute
Coolant Filter requirements 100 micron
Coolant flow rate 133 liters/min. minimum (35 US gal/min.)
Dimensions: Head & P/S (L,W,H) 3105 x 855 x 883 mm (122.2 x 33.6 x 34.75 in.)
Weight resonator & P/S 1200 kgs(2,646 lbs)
   
 
 
For information email [email protected]