The
CV SERIES laser is the newest Fast Axial Flow CO
2 laser from CONVERGENT LASERS. Designed and manufactured exclusively for use on the products of the PRIMA group. This laser produces both the high power and an exceptional quality beam required for the most difficult material processing applications. The design utilizes the latest technology and with a basic philosophy that stresses simplicity and high reliability for worldwide usage.
CV SERIES LASERS, like the CP SERIES LASERS, are rugged industrial lasers, inexpensive to operate, extremely reliable, and very easy to use.
Main Features:- High brightness beam for greatest power density
- DC excitation - resulting in superior electrical efficiency when compared to RF excited lasers
- Magnetic Bearing Turbine - no more bearing changes
- Unique resonator structure - fast warm-up, excellent temporal and spatial stability
- Solid-state power supply - reliable, low maintenance operation
- New user friendly PC based Controller - featuring advanced remote diagnostics
- Low operating costs - Proportational gas usage as a function of power
- Single cabinet design for easy access to maintenance points
Resonator Features:
- Machined aluminum end plates for increased optical stability
- Resonator design comprised of forced balanced components, symmetry and near zero growth advanced composite elements
- Kinematic mounting - excellent beam quality and pointing stability
- End blocks at ground potential
- Designed for very long intervals between required service
Power Supply Features:
High voltage components protected from environmental contamination - Advanced IGBT technology power supply
- Newly designed "oil-less" solid state power supply
- Fast rise time resulting in optimum cutting of the most complex contours with out worry of overheating
Controls and Interface Features:
- PC based controller with IEC 61131 (industry standard) software
- Versatile interface - laser can be operated from CNC or local control
- CAN Bus communication between controller and components / sensors
CV SERIES LASER SPECIFICATIONS
| CV5000 |
| Average Power | 200 to 5000 W |
| Power Stability | +/-2% FS |
| Wavelength | 10.6 micrometers |
| Beam Propogation factor - M2 | <2.4 (typical 2.1 to 2.3) |
| Beam Divergence | 1.5 mrad - half angle |
| Beam Diameter at Output | 14.5 mm 1/e2, 19 mm full beam |
| Pulsing - Pulse Repetition Rate | 0 - 2 kHz |
| Pulse Width Range | |
| Pointing Stability | +/- 150 µradians |
Operating Conditions | |
Ambient Temperature | 10° C to 40° C |
Relative Humidity | <95% Non Condensing |
| Diode Laser (pointing) | |
Power Output | <1 mW |
Wavelength | 635 nanometers |
CV SERIES LASER UTILITIES SPECIFICATIONS
| CV5000 |
Electrical | |
Maximum Power Required | 40 kW |
Voltage | 350 VAC - 520 VAC, 3 Phase |
Cooling | |
Required Cooling Capacity | 45 kW |
Flow Rate | 133 lpm (35 gpm) |
Inlet Temperature | 18° to 20° C |
Maximum Inlet Pressure | 6 Bar |
Nominal Inlet Pressure | 3 Bar |
Pressure Differential | 1.5 Bar |
Fluid | Distilled Water with 35% Dowfrost HD |
Filter Requirements | 100 micrometer |
Gas | Purity | Gas Mix | Consumption: 20 slph to 70 slph VARIABLE |
He | 99.996% | 67.7% | 13.4 to 46.8 slph |
CO2 | 99.995% | 4.1% | 9 to 3.0 slph |
N2 | 99.996% | 28.2% | 5.8 to 20.2 slph |
Air | Dry DP < 0ºC | 80 psi | free of dust, oil, and other fumes |
Laser gases | Less than 10 ppm water vapor, hydrocarbons, and oxygen |
|
For further information on this subject please e-mail us at Sales