The
CP SERIES laser is a family of fast AXIAL flow CO
2 lasers producing a high quality beam for material processing. The design utilizes the latest technology and with a basic philosophy that stresses simplicity and high reliability for worldwide usage. The
CP SERIES, a rugged industrial laser, is inexpensive to operate, extremely reliable, and very easy to use.
Main Features:- Enhanced pulsing - to 7,000 Watts
- High brightness beam for greatest power density
- Unique resonator structure - fast warm-up, excellent temporal and spatial stability
- Solid-state power supply - reliable, low maintenance operation
- Powerful controls interface
- Low operating costs
- Small footprint (<90 cubic feet)
Resonator Features:
- Machined aluminum end plates for increased optical stability
- Resonator design comprised of forced balanced components, symmetry and near zero growth advanced composite elements
- Kinematic mounting - excellent beam quality and pointing stability
- End blocks at ground potential
- Designed for rapid service
Power Supply Features:
Independent control over pulse peak, pulse plateau and overall pulse width - Peak pulse power up to two times the rated average power
- High voltage components protected from environmental contamination
- Advanced IGBT technology power supply
Controls and Interface Features:
- GE Fanuc Versamax programmable logic controller
- Versatile interface - laser can be operated from CNC or local control
CP and CV SERIES LASER SPECIFICATIONS
| CP3000 | CP3500 | CP4000 | CV5000 |
| Average Power | 200 to 3000 W | 200 to 3500 W | 200 to 4000 W | 200 to 5000 W |
| Power Stability | +/-2% FS |
| Wavelength | 10.6 micrometers |
| Beam Propogation factor - M2 | <2.4 (typical 2.1 to 2.3) |
| Beam Divergence | 1.5 mrad - half angle |
| Beam Diameter at Output | 14.5mm 1/e2, 19mm full beam |
| Pulsing - Pulse Repetition Rate | 0 - 2 kHz |
| Pulse Width Range | |
| Pointing Stability | +/- 150 µradians |
Operating Conditions | |
Ambient Temperature | 10 Degrees C to 40 Degrees C |
Relative Humidity | <95% Non Condensing |
| Diode Laser (pointing) | |
Power Output | <1 milliwatt |
Wavelength | 635 nanometers |
CP and CV SERIES LASER UTILITIES SPECIFICATIONS
| CP3000 | CP3500 | CP4000 | CV5000 |
Electrical | | | | |
Maximum Power Required | 28 kW | 31 kW | 34 kW | 40 kW |
Voltage | 400 VAC - 460 VAC, 3 Phase |
Cooling | | | | |
Required Cooling Capacity | 34 kW | 36 kW | 40 kW | 45 kW |
Flow Rate | 133 lpm (35 gpm) |
Inlet Temperature | 18 to 20 degrees C |
Maximum Inlet Pressure | 6 Bar |
Nominal Inlet Pressure | 3 Bar |
Pressure Differential | 1.5 Bar |
Fluid | Distilled Water with 35% Dowfrost HD |
Filter Requirements | 100 micrometer |
Gas | Purity | Gas Mix | Consumption: 20 slph to 70 slph VARIABLE |
He | 99.996% | 67.7% | 13.4 to 46.8 slph |
CO2 | 99.995% | 4.1% | 9 to 3.0 slph |
N2 | 99.996% | 28.2% | 5.8 to 20.2 slph |
Air | Dry DP < 0ºC | 80 psi | free of dust, oil, and other fumes |
Laser gases | Less than 10 ppm water vapor, hydrocarbons, and oxygen |
|
For further information on this subject please e-mail us at Sales